Welcome to Silverfish. This site uses cookies. Read our policy.

 

 

Yeti bikes have an unwavering tendency to elicit an emotional reaction – especially from long time riders. Steeped in racing history since the anodized glory days and now finding their way to the top of the Enduro World Series podium, Yeti's bikes have a reason for being objects of desire.

Yeti fans (and there are many of them) speak highly of the 575, a workhorse and a pioneer in the now-burgeoning mid travel category. The 575, now in its fourth iteration with lineage tracing back to 2004, has been reworked this year for 27.5"" wheels, yet still sports the same 146mm (or 5.75"") of rear wheel travel.

The silhouette of the 575 is remarkably unchanged since the early days of the platform. A low-slung top tube traces a line through the shock and down the seat stays to the rear axle. The unique single pivot design has been adapted through the years but doesn't look out of place on the showroom today.

The 575's distinctive look begins with the stepped tapered head tube.

For the 2014 model year we do see some changes to the geometry chart. The chainstay has been lengthened from 16.9"" to 17.5"" (or 445mm) and the head angle has slackened out a degree to 67¼. A Fox 34 has been chosen over the previous model's 32 – a move in the right direction for a platform that has been known to be capable beyond what its geometry chart might infer.

The 575 is available in five sizes with generous cockpits, including an XL size that should have taller riders rejoicing. Head tubes get larger with size, making the already long top tube lengths even bigger. This is definitely a pedaler's bike; under all those changes the trusted Yeti 575 carries through.

A low slung top tube has been present on the 575 since its first iteration in 2004. Now in its fourth generation, the frame has responded well aesthetically to a hydroformed update.

Down tube bottle cage mounts to keep your electrolyte levels up.

The offset main pivot houses a double row of bearings and makes room for a direct mount front derailleur.

As well as a sneaky entrance for the internal dropper post cable.

Out back the 575's ultra-simple design is carried through on the 27.5"" update. No pivots to be found out here, which no doubt helps stiffen up the design.

The one piece chainstay and seat stay drive the shock directly with help from a linkage mounted above the shock. How Yeti managed to do away with the seat stay pivot is beyond me, but if it works it works!

This year the 575 comes standard with a Fox 34 Kashima CTD-Adjust across the board rather than the 32 of the past. With a bit more length in the rear end and Yeti's generous top tubes, this is a bike built for speed.

Stock tire choice is a 2.3"" High Roller II EXO up front and a 2.25"" Ardent EXO out back. I've since swapped the HR2 to the rear and put a 2.3"" Minion DHR II up front. DT XM401 rims, weighing in at 430 grams, are laced 28 hole to DT 350 hubs.

The 575 Race gets a bombproof XT 2X10 system.

Under that XT crankset is an ISCG mount and a PF30 bottom bracket.

Right down to the shifters.

And of course, the always appreciated XT brakes.

Thomson's dropper post lever is in a bit of an unusual position but it'll just take some getting used to. I've since pushed the levers in and have the dropper next to the grip. The straight out of the lever cable housing stands out, but I'll save further comment for the 575's long term review.

At the other end of that cable is the smooth as butter Thomson Elite dropper. The seat tube, a 72¼ line straight from the bottom bracket, doesn't hide anything in effective numbers but still does come out a touch slack for taller riders. Zero offset posts are pretty well standard these days but on this frame it is a necessity.

To match the Thomson post, a 70mm stem resides up front clamping a carbon 750mm Easton Havoc bar. You certainly won't mind looking down at this cockpit.

Black, gold, and teal. It's good.

The 2014 Yeti 575 Race.

The Yeti 575 Race retails for $4600 USD. There is an X01 spec bike at the same price point, a $3500 Enduro spec, and a $6600 Pro spec with full XTR. Check out the models HERE, and stay tuned for the full smash review.

Do you have a Yeti crush?

You can read this and other great MTB related news over at NSMB.com

Silverfish UK Ltd. Units 3a-3c Woodacre Court, Saltash Parkway Industrial Estate, Burraton Road, Saltash, Cornwall, United Kingdom, PL12 6LY
Silverfish UK Ltd. (Registration No. 4075057).

Technical specifications are for guidance only and cannot be guaranteed accurate. All offers are subject to availability and while stocks last. Errors and omissions excepted. Silverfish UK Limited acts as a credit intermediary and only offers credit products for Close Brothers Retail Finance. Its registered office is: Close Brothers Group plc, 10 Crown Place, London EC2A 4FT. Credit is subject to application and status.

Powered by Netalogue