Skip to Navigation Skip to Content
 
Rocky Mountain Vertex 50
RRP £1495.00
Rocky Mountain Vertex 50 - Click to enlarge.

Knowledgebase

If you cannot find the answer to your question, submit it to our tech team.
Question/Comment(414)
Orkun Ekizler asks:
I have a 2005 Rocky Mountain ETS X-90. Although i haven't experienced any specific problem, after 5 years I want the replace the pivots on swingarm and rear triangle. Where can I obtain them ?
Silverfish Replies:
Hi there

You can order all Rocky Mountain small parts such as replacement pivot bearings, pivot axles or mech. hangers via your local Rocky Mountain dealer which can be found via the BUY section.

Cheers
Question/Comment(384)
Kevin Olivier asks:
I bought and still own a Rocky Mountain Slayer 2005 model and need to replace the frame bearings and plastic bushes ie near the rear chain stay. Could you please provide the bearing reference numbers component references for the plastic bushes.
Silverfish Replies:
Hi there

We try to keep stock of all spares and hardware for Rocky Mountains of all ages, please contact me directly with the exact parts you need I will provide the correct part numbers required for you to place an order via your local Rocky mountain dealer.

paul@silverfish-uk.com

Cheers
Question/Comment(344)
Chris Ambler asks:
Which derailur hanger would fit a 2009 RM Vertex 50? I always like to have a spare in my toolbox
Silverfish Replies:
Hi,

The 2009 Vertex 50 uses a dropout with a code 180089UAT

Question/Comment(328)
bob billingham asks:
Do you have a sizing chart for Turner frames? I am undecided whether to go for the Flux frame or the 5 Spot - but am not sure what size I would need - I am 6 foot.
Silverfish Replies:
Hi, we do not like to recommend frame or bike sizes over the internet as factors such as riding style etc also need to be taken into account. We recommend that you locate your nearest dealer using the 'buy' section of our website or attend one of our demo days. Dates of which can be located in the 'try out' section of the site.
Question/Comment(319)
Malcolm Price asks:
Hi - I have a 2007 ETSX70 and require the bottom shock pivot rod which runs through the bushes and the two screws which hold it together. can you supply this or suggest a dealer close to Wrexham in North Wales,
Thanks
Silverfish Replies:
Hi,

Thank you for your question but I am not 100% which parts you are after. Under the 'Manuals' section of the product page you will be able to find all the parts and codes for your model and year of bike. These parts can then be ordered from your local Rocky Mountain dealer.
Question/Comment(301)
klam asks:
Are all Vertex frames made of Scandium? To be Specific, I'm referring to the Vertex 50. Do you know where I can get the geometry specs for a 2002 Vertex Team?
Silverfish Replies:
Only the Vertex Team Scandium was made from scandium; all of the regular Vertex frames are made from RMB FORM 7005 tubes.
^^GO TO TOP^^

Make Silverfish your default homepage
Join our Email Newsletter:
home | news | products | try out | gallery | teams | support | buy | contact | trade