Welcome to Silverfish. This site uses cookies. Read our policy.

Michelin E-Wild Tyre
UOS: Piece
Hide
Price:
£49.99
inc. VAT
Discipline: E-MTB
  • Terrain Type: Mixed
  • Maximum grip E-GUM-X technology
  • Extra protection due to Gravity Shield casing
Colour

Size

Product Details

Whether you're exploring the off-road or facing the challenges of enduro riding, the front tyre has been designed to give your E-bike the protection and versatility to do it all. Using Michelin's Gum-X rubber compound for extra grip, as well as Gravity Shield tech for extra protection on the rough mountain trail, this tyre will ensure you have the strength and durability to keep on rolling.

The rear tyre has been designed to give your E-bike the versatility and protection necessary to excel at enduro riding. Using Michelin's Gum-X rubber compound for an enhanced grip on the dirt, as well as Gravity Shield tech for extra puncture protection, this tyre will ensure you have the strength and durability to keep on rolling.

Extra Grip
Using E-GUM-X, a new rubber comprising lateral and central rubbers designed to optimise grip, with a tread pattern from the Enduro ranges for a better hold. This new generation of top of the range rubbers that give better rolling strength and lower energy consumption.

Better Protection
Due to its "Gravity Shield" casing from Enduro competitions and based on its "Pinch Protection" technology which absorbs the energy from pinch flats.

More Kilometers
Due to its "Gravity Shield" casing from Enduro competitions.


Specification

SKU DISCIPLINE TERRAIN TYPE BEAD SEALING ETRTO SIZE FITTING TPI WEIGHT RUBBER TECH CASING TECH OTHER TECH MIN PRESSURE (BAR) MAX PRESSURE (BAR) RECOMMENDED TUBE COLOUR
MIC-415065 E-MTB MIXED FOLDABLE TUBELESS READY 66-584 27.5"X2.60" FRONT 3X60 1000g E-GUM-X GRAVITY SHIELD E-BATTERY DESIGN 1.5 4 B6 BLACK
MIC-174005 E-MTB MIXED FOLDABLE TUBELESS READY 71-584 27.5"X2.80" FRONT 3X60 1090g E-GUM-X GRAVITY SHIELD E-BATTERY DESIGN 1.5 4 B6 BLACK
MIC-741070 E-MTB MIXED FOLDABLE TUBELESS READY 66-584 27.5"X2.60" REAR 3X33 1220g E-GUM-X GRAVITY SHIELD E-BATTERY DESIGN 1.5 4 B6 BLACK
MIC-580029 E-MTB MIXED FOLDABLE TUBELESS READY 71-584 27.5"X2.80" REAR 3X33 1310g E-GUM-X GRAVITY SHIELD E-BATTERY DESIGN 1.5 4 B6 BLACK


Technical Information



Other Colours

Product Reviews

Finance Calculator

FAQ

STANDARD TYRE FITTING
(with inner tube)

  1. Carefully check the condition of the rim. A poor-condition, broken or cracked rim must be replaced as it could cause leaks and be dangerous.
  2. Check the condition of the rim tape. Broken or cracked tape must be replaced as this often causes punctures.
  3. Insert the 1st bead into the rim.
  4. Slightly inflate the inner tube to make it round and insert it into the tyre, starting with the valve. For latex inner tubes, do not forget to apply talc to make it easier to position it in the tyre.
  5. Repeat for the 2nd bead starting on the opposite side to the valve and positioning the bead at the bottom of the rim. Finish off fitting near to the valve.

TUBELESS READY

A Tubeless Ready tyre is a tyre that can be fitted without an inner tube. It is made airtight using sealant rather than an inner tube.

To fit a tubeless tyre:

  1. Use a UST Tubeless wheel.
  2. Add sealant.
  3. Comply with the maximum pressure indicated on the tyre sidewall.

TUBELESS

  1. Use a UST-Tubeless rim. Carefully check the condition of the rim. A poor-condition, broken or cracked rim must be replaced as it could cause leaks and be dangerous.
  2. The rim must be lubricated all over to make it easier to move around when fitting the tyre but mainly so it can be centered perfectly.
  3. The lubricant must be soapy water type or equivalent (no oil or grease).
  4. Start by positioning the first bead on the opposite side to the valve, taking care to position the bead at the bottom of the well.
  5. Inflate the tyre until it is in position without exceeding the maximum pressure indicated on the sidewalls and make sure that the tyre is properly centered. Adjust the pressure after cycling a few miles.

REMOVING

  1. Loosen the beads from around the rim.
  2. Push them to the bottom of the well.
  3. Carefully position a tyre lever on either side of the valve (about 10cm) and lift the tyre over the rim hook.
  4. Work one of the levers around the rim between the hook and bead to fully remove the first bead.
  5. Extract 2nd bead by hand.

RIM TAPE

This protects the inner tube in contact with the rim, preventing it from being damaged by spoke ends once it is inflated. It must be the width of the rim cavity. There is a Tubeless version for Tubeless and Tubeless Ready tyres.